• Our Leather Stamps are Machined vs. Laser Engraved, producing sharper stamped impressions with crisp edges on leather than Laser engraved Stamps.

• Straight Edges for alignment - All of our stamps are made on square or rectangular stock allowing you to register and align your logo on your workpiece to avoid a crooked logo.

• Parallel Face - Our stock is faced on both sides to ensure a uniform impression when using in a press.

• Will not warp - Our stock is Stress Relieved - Our Stamps are Stress Relieved before machining to prevent warping / uneven embossing.

• Greater Detail -

  We use a customized high speed mill (60,000 RPM), allowing use of smaller tooling tip diameters down to 100 microns. This translates to greater detail and allows for deeper engraving in small areas.

For special applications, we reserve our high power laser to engrave details that cannot be achieved by milling.

Order online for priority timing by adding items below to your cart and completing the checkout

If you would rather speak to someone before ordering, please contact us by phone or email

Payment can be done through credit card or e-transfer

Shipping is done using Canada Post, UPS or Puralator and Includes Tracking and Insurance). It is a flat rate of $14.95 in Ontario and $19.95 anywhere in Canada.

We have waived shipping fee for our American customers offering Free Shipping to the US to help offset any Duties as of Feb 1st 2025.

Our US Customers are not charged any sales tax.

We offer a free logo design service with the purchase of a branding iron.

This service requires that customers have a single design concept narrowed down and can provide a detailed sketch showing placement of the design elements and a description of the type of fonts, i.e. Cursive, Heavy Weight, Serif… etc.

The service includes up to 3 modifications of the same design.

Our leather stamps can be used with a hammer for sizes smaller than 1 square inch. For larger sizes, they can be used in a vice, C Clamp or Arbor Press.

They can be mounted in hot foil presses and we support with various fasteners to fit any machines.

All of our Leather Stamps are made in Ontario Canada, just north of Toronto with our unique manufacturing Process.

For Leather Stamping we recommend letters no smaller than 1.5 mm or 1/16” in height for optimal material flow.

For deeper embossing, we recommend larger characters and less detail.

For deep emboss applications, we recommend larger cha

Letters smaller than this

Hot Branding of Leather can be done with either our Leather Branding Irons or with our Hot Foil Press.

When purchasing a Branding Iron for Leather, it’s important to also purchase the power controller to dial back the heat to avoid scorching the leather.

Our Hot Foil Stamping Machine, has a built in temperature control with thermostat that regulates the temperature at a precise temperature.

At Uneak Creations our primary method for producing leather stamps is by Machining or Milling.

Milled stamps have a sharper edge than Laser Cut Stamps giving more crisp lines.

In rare cases, we may use the Laser Method if it’s more suitable for your logo.

After even a single use, the brass branding irons will loose it’s original shiny appearance. This is normal and is cosmetic only and will not affect the performance.

For the most part, branding irons are self cleaning as most build up is burned off between uses due to the extreme heat.

After repeated use, if you find the brand building up a dark deposit it may be cleaned using household stove cleaner and allowing to sit to loosen the deposit.

Do not use brass or steel wire brushes to clean. Take care while cleaning to avoid damage to the delicate features of the artwork.

Do not attempt to sand or level the face of the artwork with a stone or sandpaper.

Branding Irons can be extremely dangerous and improper use could lead to serious injury and cause fire

Use only soap and water for cleaning food grade branding irons. Never leave a branding iron unattended while heating

Ensure you have a fire extinguisher near by before using

Rest branding iron on a safe surface to cool down after use or between uses. Surfaces may include large cast iron tops, concrete pavers or other concrete blocks.

Do not leave a branding iron unattended unless and until you know it has cooled sufficiently for safe handling without risk of injury.

Ensure the branding head and handle are secure prior to use. It is possible for the head to come loose with repeated use causing injury.

Both of these machines use self centering side clamps compatible with our stamps.

For the KWIK Print, a spacer would be requried to ensure your stamp face is proud of the clamps

No spacer is required with the Dream Factory machine